About this episode
Build a 3D printed enclosure for your IOT Air Quality Sensor. This project uses sensors to measure PM2.5 (particles that are 2.5 microns or smaller in diameter) dust concentrations, temperature and humidity.
This weatherproof enclosure is modeled after a silo-home. We've included different types of mounting holes and brackets for different mounting configurations.
Learn Guide: https://learn.adafruit.com/air-quality-sensor-silo-house/
PMS5003 Air Quality Sensor
https://www.adafruit.com/product/3686
PMSA003I Air Quality Sensor
https://www.adafruit.com/product/4632
BME280 Sensor
https://www.adafruit.com/product/2652
BME680 Sensor
https://www.adafruit.com/product/3660
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
