About this episode
3D print your own ornaments with a display! Use the TFT Gizmo or E-ink Gizmo to display custom images with the Circuit Playground Bluefruit. The 3D printed ornament is designed to snap fit together for an easy assembly!
Learn Guide
https://learn.adafruit.com/display-ornaments-with-circuit-playground/
Circuit Playground Express
https://www.adafruit.com/product/3333
Circuit Playground Bluefruit
https://www.adafruit.com/product/4333
TFT Gizmo
https://www.adafruit.com/product/4367
E-Ink Gizmo
https://www.adafruit.com/product/4428
Fully Reversible USB Cable
https://www.adafruit.com/product/4111
350mAh Battery
https://www.adafruit.com/product/4237
Slide Switch
https://www.adafruit.com/product/805
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
