About this episode
Build a custom NeoPixel LED matrix in the shape of a heart! Trigger colors and animations with BLE using the ItsyBitsy nRF52840. Use Black LED acrylic and 3D printed case to make it wearable!
Learn Guide
https://learn.adafruit.com/neopixel-led-heart-necklace/
ItsyBitsy nRF52840
https://www.adafruit.com/product/4481
Mini Skinny NeoPixel Strip
https://www.adafruit.com/product/2970
Lipo Backpack
https://www.adafruit.com/product/2124
500mAh Battery
https://www.adafruit.com/product/1578
Slide Switch
https://www.adafruit.com/product/805
10-wire ribbon cable
https://www.adafruit.com/product/3890
Black LED Acrylic
https://www.tapplastics.com/product/plastics/cut_to_size_plastic/black_led_sheet/668
Project inspired by Charlyn Gonda
https://charlyn.codes/magic-acrylic-stays-opaque-until-light-shines-through/
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
